Woodcraft's Monster adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. You now have the option to flip your adapter plate upside down, which results in a more aggressive riding position that improves both traction and feel. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.

Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash.

Our exclusive design will set your bike apart at the race track or your local bike night.

Note: If the plate is used in the flipped position, a 10mm Spacer Kit (sold separately) is required to use a 1.5 inch or 2 inch riser. Longer cables will be needed if using 2 inch rise or above. 1 inch rise in the UP position will work without problems, the 1.5 inch riser is very tight with the stock parts and anything 2" or more will certainly require extended cables and brake lines.

Features:

• Machined from 6061-T6 billet aluminum
• Bar tubes included. replacements available
• height can be adjusted via risers
• Most plates can be flipped to adjust riding position

Fits the following Models:

•  Monster 1100 (2009-2011)
•  Monster 1100 EVO (2012-2013)
  
•  Monster 695 (2008)
•  Monster 696 (2008-2014)
•  Monster 696 ABS (2014)
• Monster 796 ABS (2014)